AIA OC: What Architects Need to Know for 2018 T24 and New Green Codes Possible Legal Cases …

 Comments Off on AIA OC: What Architects Need to Know for 2018 T24 and New Green Codes Possible Legal Cases …
Dec 052017
 

What Architects Need to Know for 2018 T24 and New Green Codes Possible Legal Cases …

 

First Greetings, happy Holidays, Merry Christmas to All.

Next week session will be uploaded separately.

The site will give warning prior to download. Skip and go through for final download.

If not, email me and I will send directly.

My experience in legal issues and practicing with the Green Code and Title-24 provided many good examples for you and your firm to ponder.

Note, you design, you specify, you take the liability.

Always send me a note on issues that concerns you on any similar matters.

Dr. Nour

Download File:[download id=”25″]

 

 

 

My Certified in Plumbing Design ~200 Page Lecture Notes for CPD / EIT / Fluids in Civil/Mech/Chemical PE

 Comments Off on My Certified in Plumbing Design ~200 Page Lecture Notes for CPD / EIT / Fluids in Civil/Mech/Chemical PE
May 232017
 

Greetings for future Engineers,

This is my lecture notes for those studying for these  exams.

 

If you see errors, please correct and scan and email  them to snour@absoluteco.com

 

Do not take any test lightly.

I will upload all my 12 ft of lecture notes in this blog.

 

Here Part I o the Hyperlink.

Saum 200 page Fluid Notes- Part I

Good Luck and Pass the test.

 

Dr. K. Nour, PE “Saum”

 

 

IAPMO Lectures: 2015 Uniform Plumbing Code® Important Code Changes

 Comments Off on IAPMO Lectures: 2015 Uniform Plumbing Code® Important Code Changes
Aug 022016
 
IAPMO Lectures: Santa Ana 7/13/2016 and Oceanside 8/2/2016

2015 Uniform Plumbing Code® Important Code Changes

Chapter 2 Definitions
204 Bottle Filling Station and 206.0 Drinking Fountain
220  Registered Design Professional
Chapter 3 General Regulations
312.6 Freezing Protection
312.14 Ex posed PVC Piping
314.1 Trenches
314.4 Excavations
320 Rehabilitation of Piping Systems
Chapter 4 Plumbing Fixtures and Fixture Fittings
407 Lavatories
412.1.1 Nonwater Urinals
413 Flushing Devices
415.2 Bottle Filling Stations
418.3 Location of Floor Drains
421 Floor Sinks
Chapter 5 Water Heaters
501.1 Applicability, 505.1Water Heaters, and 505.4 Indirect-Fired Water Heaters
505.4.1 Single-Wall Heat Exchanger
507.5 Drainage Pan
320.1 320.1   Pipe, Tube, and Fittings and 605.9.1 Fittings
320.2 320.2   Lead Content
Chapter 6 Water Supply and Distribution
606.5 Control Valve
608.3 Expansion Tanks and Combination Temperature and Pressure-Relief Valves
612 Residential Fire Sprinklers
Chapter 7 Sanitary Drainage
707.4 Location
707.9 Clearance
710.4 Discharge Line
Chapter 8 Indirect Waste
814 Condensate Wastes and Disposal
Chapter 9 Vents
906.3 Use of Roof
908.2 Horizontal Wet Venting for a Bathroom Group
911  Circuit Venting
Chapter 10 Traps and Interceptors
1009.1 Where Required
Chapter 12 Fuel Gas Piping
1208.5.9.2 Gas Joints, Pressure Regulators, and Valves
1208.7 Gas Joints, Pressure Regulators, and Valves
1212.5 Gas Joints, Pressure Regulators, and Valves
1212.8 Sediment Trap
Chapter 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems
1303.8 Water Supply for Hospitals
Chapter 15 Alternate Water Sources for Nonpotable Applications
1501.2 System Design
407  Inspection and Testing
408 Separation Requirements
1504.7 On-Site Treated Nonpotable Water Devices and Systems
Chapter 16 Nonpotable Rainwater Catchment Systems General Changes 
1602.6 Sizing
1602.9.3 Rainwater Catchment System Surfaces
1902.9.5.8 Storage Tank Venting
1602.11.1 Supply System Inspection and Test